Journal explores optics research in LEDs for lighting 07 Jul 2011Designed to highlight recent breakthroughs in LEDs, a special journal issue focuses on methods for improving luminous efficiency while delivering superior color quality. A special focus issue entitled “Optics in LEDs for Lighting,” has been published by the editors of Energy Express, a bimonthly supplement to Optics Express, the open-access journal of the Optical Society ().
The led cherry tree issue highlights the technical challenges and possible solutions that will bring visible LEDs into mainstream lighting applications. Full abstracts and papers in the special issue can be accessed online. .
Selected papers
Some of the research highlights include a paper that explores led cherry tree the technical challenges associated with fabricating LEDs on silicon substrates; research into the use of lasers for solid-state lighting; and a method for mitigating efficiency droop.
In the first paper, Kei May Lau et al. fabricate blue-emitting LEDs on silicon substrates, using novel methods for strain management, thermal management and maximizing external quantum efficiency of devices.
The silicon substrates were pre-patterned and wet chemical etching was used to remove the LED from the silicon substrate. Using an electroplated copper substrate for thermal management and a double flip process to insert a mirror, the light led cherry tree output of the final packaged LEDs was 6.5 mW under 20 mA current injection and 14 mW at 55 mA.
In the next paper, Jeff Tsao and Jonathan Wierer et al. challenged the common belief that the narrow spectral line width and the high capital cost of lasers makes them unsuited for general illumination purposes.
The research demonstrated that in terms of color rendering quality, white light from a four-color (RYGB) laser setup (see diagram) is virtually indistinguishable from white reference light, including that from an incandescent lamp and three led cherry tree phosphor-converted LEDs (warm white, neutral white and cool white). This suggests that laser light might be considered for solid-state lighting, because lasers are capable of higher efficiencies at high current densities than LEDs.
Efficiency droop, or the decrease in emission efficiency with increasing injection current associated with InGaN-based LEDs, was investigated by C. C. Yang and Yean-Woei Kiang, et al.
The researchers propose a method for enhancing emission efficiency, which is particularly effective with LEDs of relatively low internal quantum efficiency (such as green LEDs) using surface plasmon (SP) coupling with radiating dipoles (electron-hole pairs). SP led cherry tree coupling in the quantum wells of an LED enhances total radiated power by inducing SP modes on the metal nanostructures at the LED top.
